Specifications

1-13
Cisco ONS 15530 Planning Guide
OL-7708-01
Chapter 1 System Overview
System Components
Note The Cisco IOS software only supports Cisco-certified SFP optics on the 4-port 1-Gbps/2-Gbps FC
aggregation card.
The Cisco ONS 15530 supports up to five 4-port 1-Gbps/2-Gbps FC aggregation cards for a total of
20 1-Gbps client signals.
Protocol Monitoring
For FC and FICON traffic, the system monitors the following conditions on the 4-port 1-Gbps/2-Gbps
FC aggregation card:
• 8B/10B CVRD error counts
• Tx/Rx frame counts
• Tx/Rx byte counts
• Tx/Rx CRC errors
• Link failures
• Sequence protocol errors
• Invalid transmission words
• 5-minute input/output rates
• Loss of Sync
• Loss of Light
For ISC traffic, the system monitors the following conditions on the 4-port 1-Gbps/2-Gbps FC
aggregation card:
• 8B/10B CVRD error counts
• Loss of Light
15454E-SFP-GEFC-S Fibre Channel (1-Gbps and
2-Gbps)
MM 50/125 µm
MM 62.5/125 µm
850 nm LC
15454-SFP-GEFC-SX Fibre Channel (1-Gbps and
2-Gbps)
MM 50/125 µm
MM 62.5/125 µm
850 nm LC
1. FC-0-100-M5-SN-S and FC-0-100-M6-SN-S standards
2. FC-0-200-M5-SN-S and FC-0-200-M6-SN-S standards
3. FC-0-100-SM-LC-S standard
4. FC-0-100-SM-LC-S standard
5. FC-0-200-SM-LC-S standard
Table 1-5 4-Port 1-Gbps/2-Gbps FC Aggregation Card SFP Optics Features (continued)
Part Number
Protocols or Clock Rate Range
Supported Fiber Type Wavelength
Connector
Type