Specifications

3-49
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.19 ED-BITS: Edit Building Integrated Timing Supply
This command edits the BITS reference attributes.
Section ED-BITS Description
Category Synchronization
Security Provisioning
Related
Messages
ED-NE-SYNCN
ED-SYNCN
OPR-SYNCNSW
REPT ALM BITS
REPT ALM SYNCN
REPT EVT BITS
REPT EVT SYNCN
RLS-SYNCNSW
RTRV-ALM-BITS
RTRV-ALM-SYNCN
RTRV-BITS
RTRV-COND-BITS
RTRV-COND-SYNCN
RTRV-NE-SYNCN
RTRV-SYNCN
Input Format ED-BITS:[<TID>]:<AID>:<CTAG>:::[LINECDE=<LINECDE>,][FMT=<FMT>,]
[LBO=<LBO>,][SYNCMSG=<SYNCMSG>,][AISTHRSHLD=<AISTHRSHLD>]
[:<PST>];
where:
• <AID> is an access identifier from the “BITS” section on page 4-9
• <LINECDE> is a line code; valid values for <LINECDE> are shown in the
“LINE_CODE” section on page 4-42
• <FMT> is the frame format; valid values for <FMT> are shown in the
“FRAME_FORMAT” section on page 4-41
• <LBO> indicates BITS line build out. The default value is “0-133”. Valid values
for <LBO> are shown in the “BITS_LineBuildOut” section on page 4-22
• <SYNCMSG> indicates if this BITS facility supports synchronization status
message; <SYNCMSG> defaults to (Y) and valid values are shown in the
“ON_OFF” section on page 4-51
• <AISTHRSHLD> is the AIS Threshold. Valid values for <AISTHRSHLD>
shown in the “SYNC_CLOCK_REF_QUALITY_LEVEL” section on page 4-60
• <PST> is a state; valid values for <PST> are shown in the “PST” section on
page 4-53
Input Example ED-BITS:SONOMA:BITS-2:779:::LINECDE=AMI,FMT=ESF,LBO=0-133,
SYNCMSG=Y,AISTHRSHLD=PRS:IS;
Errors This message generates all the default errors