Specifications

3-47
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
2. If sending this command to edit the EXPTRC string with the AUTO path trace mode
(TRCMODE=AUTO), an error message (incompatible parameter values for exptrc and TRCMODE)
will be returned.
3. If sending this command to edit TRC on any card other than DS3(N)E, DS1(N), and DS3XM cards,
an error message (TRC-not allowed for monitor paths. Incorrect card type.) will be returned.
4. This command is allowed to edit EXPTRC on DS1(N), DS3(N)E, DS3XM, EC1, OC3, OC48AS,
and OC192 cards.
5. If sending this command to edit both TACC and any other attribute(s), the (Parameters Not
compatible) error message will be returned.
6. This command is only allowed when there are no circuits/cross connections (no UPSR connections)
on that AID.
7. If sending this command to edit TACC on an AID with circuits or cross connections, an error
message (VT in Use) will be returned.
8. TACC creation will also be denied on the protect ports/cards.
Section ED-<STS_PATH> Description
Category STS and VT Paths
Security Provisioning
Related
Messages
ED-VT1
RTRV-<STS_PATH>
RTRV-PTHTRC-<STS_PATH>
RTRV-VT1