Specifications

3-36
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.8 CANC-USER: Cancel User
This command logs a user out of an active session with the NE.
Note The USERID field of this command is a mandatory field.
Output Format SID DATE TIME
A ATAG CANC
“<UID>”
;
where:
• <UID> refers to the user’s identification whose session is terminated due to
timeout; <UID> is any combination of up to 10 alphanumeric characters. <UID>
is a string.
Output
Example
TID-000 1998-06-20 14:30:00
A 001 CANC
“CISCO15”
;
Section CANC Description (continued)
Section CANC-USER Description
Category Security
Security Retrieve
Related
Messages
ACT-USER
CANC
DLT-USER-SECU
ED-PID
ED-USER-SECU
ENT-USER-SECU
REPT EVT SECU
Input Format CANC-USER:[<TID>]:<USERID>:<CTAG>;
where:
• <USERID> identifies the user to the system; <USERID> is any combination of
up to 10 alphanumeric characters. <USERID> is a string
Note CTC allows <UID> and <PID> of up to 20 characters. The 20 character
CTC-entered <UID> and <PID> are not valid TL1 <UID> and <PID>.
Input Example CANC-USER:PETALUMA:TERRI:101;
Errors This message generates all the default errors