Specifications

Contents
viii
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
3.5.115 RTRV-PTHTRC-<STS_PATH>: Retrieve Path Trace (STS1, STS3C, STS6C, STS9C, STS12C,
STS24C, STS48C, STS192C)
3-164
3.5.116 RTRV-SYNCN: Retrieve Synchronization 3-166
3.5.117 RTRV-T1: Retrieve T1 Facility 3-167
3.5.118 RTRV-T3: Retrieve T3 3-168
3.5.119 RTRV-TH-<MOD2>: Retrieve Threshold (DS1, EC1, OC3, OC12, OC48, OC192, STS1, STS3C,
STS6C, STS9C, STS12C, STS24C, STS48C, STS192C, T1, T3, VT1)
3-170
3.5.120 RTRV-TOD: Retrieve Time of Day 3-171
3.5.121 RTRV-VT1: Retrieve Virtual Tributary 3-172
3.5.122 SET-ATTR-CONT: Set Attribute Control 3-173
3.5.123 SET-ATTR-ENV: Set Attribute Environment 3-174
3.5.124 SET-PMMODE-<STS_PATH>: Set Performance Mode of PM Data Collection (STS1, STS3C,
STS6C, STS9C, STS12C, STS24C, STS48C, STS192C)
3-175
3.5.125 SET-TH-<MOD2>: Set Threshold (DS1, EC1, OC3, OC12,OC48, OC192, STS1, STS3C, STS6C,
STS9C, STS12C, STS24C, STS48C, STS192C,T1, T3, VT1)
3-176
3.5.126 SET-TOD: Set Time of Day 3-176
3.5.127 SW-DX-EQPT: Switch Duplex Equipment 3-177
3.5.128 SW-TOPROTN-EQPT: Switch to Protection Equipment 3-178
3.5.129 SW-TOWKG-EQPT: Switch to Working Equipment 3-180
CHAPTER 4 TL1 Command Components 4-1
4.1 TL1 Default Values 4-1
4.1.1 BLSR 4-1
4.1.2 Cross Connections 4-1
4.1.3 Environmental Alarms and Controls 4-2
4.1.4 Equipment 4-2
4.1.5 Performance 4-2
4.1.6 Ports 4-3
4.1.7 SONET Line Protection 4-4
4.1.8 STS and VT Paths 4-4
4.1.9 Synchronization 4-5
4.2 Access Identifiers 4-5
4.2.1 ALL 4-5
4.2.2 CrossConnectID 4-7
4.2.3 PRSLOT 4-8
4.2.4 BITS 4-9
4.2.4.1 BITS for ONS 15454 4-9
4.2.4.2 BITS for ONS 15327 4-9
4.2.5 BLSR 4-9
4.2.5.1 BLSR for ONS 15454 4-9