Specifications

1-6
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 1 Getting Started
TL1 Commands by User Security
1.4 TL1 Commands by User Security
The following table specifies command access privileges for each user security level.
User security levels limit the amount of time a user can leave the system idle before the TL1 session is
locked to prevent unauthorized users from making changes. Higher security levels have shorter idle
times. Table 1-2 shows security levels and their idle times.
Table 1-1 Command Access
Command Superuser Provisioning Maintenance Retrieve
DLT-USER-SECU X
ED-DAT X
ED-USER-SECU X
ENT-USER-SECU X
SET-TOD X X
DLT-*-* X X
ED-*-* X X
ENT-*-* X X
SET-*-* X X
INIT-*-* X X X
OPR-*-*XXX
RLS-*-* XXX
RMV-*-*XXX
RST-*-* XXX
SW-*-* XXX
ALW-*-*XXXX
INH-*-* XXXX
REPT * *XXXX
RTRV-*-*XXXX
CANC-*-*XXXX
ACT-*-*XXXX
ED-PID XXXX
Table 1-2 Security Idle Times
Security Level Idle Time
Retrieve Unlimited
Maintenance 60 minutes
Provisioning 30 minutes
Superuser 15 minutes