Specifications

4-59
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 4 TL1 Command Components
Parameter Types
4.3.76 STS_PATH
Modifier for some of the STS commands. This table does not include STS for the RTRV-CRS command,
because STS is not a standard designator.
4.3.77 SWITCH
The type of switch to be initiated
4.3.78 SWITCH_TYPE
BLSR switch type
Table 4-109 STS_PATH Values
STS_PATH Values Description
STS1 Synchronous Transport Signal level-1 (51 Mbs)
STS3C Synchronous Transport Signal level-3 Concatenated (155 Mbs)
STS6C Synchronous Transport Signal level-6 Concatenated (310 Mbs)
STS9C Synchronous Transport Signal level-9 Concatenated (465 Mbs)
STS12C Synchronous Transport Signal level-12 Concatenated (622 Mbs)
STS24C Synchronous Transport Signal level-24 Concatenated (1240 Mbs)
STS48C Synchronous Transport Signal level-48 Concatenated (2488 Mbs)
STS192C Synchronous Transport Signal level-192 (9952 Mbs)
Table 4-110 SWITCH Values
SWITCH Values Description
FRCD Force a switch unless another FRCD or LOCKOUT is in effect
LOCKOUT Locks the facility out of switching. The system cannot switch to the protect
facility to carry service.
MAN Requests a manual switch of the facility
Table 4-111 SWITCH_TYPE Values
SWITCH_TYPE
Values Description
RING BLSR ring switch type
SPAN BLSR span switch type