Specifications

4-55
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 4 TL1 Command Components
Parameter Types
4.3.63 REVERTIVE_TIME
Revertive time
4.3.64 RNG_TYPE
Defines the type of ring that is to be deployed for this path
4.3.65 SD_BER
The threshold for declaring Signal Degrade on a facility or path
4.3.66 SDCC_MODE
Enables or disables the Section Data Communications Channel (SDCC) for the specified facility
Table 4-96 REVERTIVE_TIME Values
REVERTIVE_TIME Values Description
0.5 – 12.0 Revertive time is 0.5 to 12.0 minutes
Table 4-97 RNG_TYPE Values
RNG_TYPE Values Description
BLSR2 2-Fiber Bidirectional Line Switched Ring
BLSR4 4-Fiber Bidirectional Line Switched Ring
UPSR Unidirectional Path Switched Ring
Table 4-98 SD_BER Values
SD_BER Values Description
1E-5–1E-9 SDBER is the 1E-5–1E-9
Table 4-99 SDCC_MODE Values
SDCC_MODE Values Description
N Section Data Communications Channel is disabled for this facility
Y Section Data Communications Channel is enabled for this facility