Specifications

4-28
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 4 TL1 Command Components
Parameter Types
FRCWKBK-S Working facility/equipment forced to switch back to working - Span
FRCWKPR-R Working facility/equipment forced to switch to protection unit - Ring
FRCWKPR-S Working facility/equipment forced to switch to protection unit - Span
FRNGSYNC Free Running Synchronization mode
FSTSYNC Fast Start synchronization mode
FULLPASSTHR-BI Bi-direction Full Pass Through is active
FULLPASSTHR-UNI Uni-direction Full Pass Through is active
HITEMP Internal hardware - Equipment failure - High temperature
HLDOVRSYNC Holdover synchronization mode
IMPROPRMVL Procedural Error - Improper Removal
INC Incoming failure condition
INC-ISD Incoming failure condition - Idle Signal Path
INHMSG ALM/EVT Messages Suppressed for object & sub-objects
INHMSG-DBCHG DBCHG Messages Suppressed for entire shelf
INHSWPR Inhibit switch to protect request on equipment
INHSWWKG Inhibit switch to working request on equipment
INIT Recovery action - Initialization initiated
INT Internal hardware fault or failure
INTER-RING-STARTUP Far end LockOut All Protection Channels of the network
INTERR Error Internal to the NE Detected
INTMSGERR One or more ALM/EVT/DBCHG messages lost
INTRUSION Security: invalid login with user-ID %s
INTSFT Internal Error - Software Fault or failure
INVMACADR Equipment failure - Invalid MAC Address
KB_PASSTHR K-Byte Pass Through is active
LANOVERFLOW Traffic storm on LAN. LAN temporarily disabled
LKOUTPR-R Lockout of Protection - Ring
LKOUTPR-S Lockout of Protection - Span
LKOUTWK-R Lockout of working - Ring
LKOUTWK-S Lockout of working - Span
LOCKOUT-REQ Lockout switch request on facility/equipment
LOCKOUT-REQ-RING Lockout switch request on a Ring
LOCKOUT-REQ-SPAN Lockout switch request on a Span
LOCKOUTOFPR Recovery action - Lockout of Protection
LOCKOUTOFPR-ALL Far end LockOut All Protection Channels of the network
LOCKOUTOFPR-PATH Recovery action - Lockout of Protection - Path
Table 4-46 CONDITION Values (continued)
CONDITION Values Description