Specifications

4-26
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
September 2002
Chapter 4 TL1 Command Components
Parameter Types
DATAFLT Internal Error - Software Fault - Data integrity fault
DS3-MISM DS3 Frame Format Mismatch
E-W-MISMATCH Procedural Error - Mis-connect East/West Direction
EOC Embedded Operations Channel (Section DCC) failure
EOC-DOWN Embedded Operations Channel (Section DCC) failure
EQPT Internal hardware - Critical alarm caused by equipment failure
EQPT-FAIL Equipment failure - Board Failure
EQPT-MAC Equipment failure - Medium Access Control
EQPT-MISS Replaceable Equipment/Unit is Missing
ESW External error - Excessive Switching
EXCCOL External failure - Incoming - Excess collisions on the LAN
EXERCISE-RING- FAIL Exercise Ring Failed
EXERCISE-RING-REQ Exercise Ring
EXERCISE-SPAN-FAIL Exercise Span Failed
EXERCISE-SPAN-REQ Exercise Span
EXERCISING-RING Exercise Ring Completed
EXERCISING-SPAN Exercise Span Completed
EXT Failure detected External to the NE
EXTERR External Error
EXTR-DROP BLSR Extra Traffic Dropped
EXTRA-TRAF-PREEMPT Extra Traffic preempted
FA Internal hardware - Power failure - Fuse Alarm
FAC External failure - Incoming - Facility, critical alarm caused by DS3
facility failure
FACTERM Internal hardware - Facility Termination equipment failure
FAILTORLS Internal hardware - Failure To Release from protection
FAILTOSW Internal hardware - Failure To Switch to protection
FAILTOSW-PATH Failure to switch from the working path to the protection path on an
UPSR
FAILTOSWR Failure to Switch to Protection in a Ring
FAN Fan Tray failure
FANDEGRADE Partial Failure of cooling fan tray
FE-AIS Far-end DS3 node is reporting an AIS
FE-DS1-MULTLOS Multiple inputs detect a loss on the far-end
FE-DS1-NSA Non-service affecting failure detected from the far-end DS1
FE-DS1-SA Service affecting failure detected from the far-end DS1
FE-DS1-SNGLLOS One of the DS1 inputs on the far-end detects a LOS
Table 4-46 CONDITION Values (continued)
CONDITION Values Description