Specifications

4-24
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 4 TL1 Command Components
Parameter Types
4.3.12 COND_EFF
The affected unit’s condition
4.3.13 CONDITION
The condition type of the alarm indication
Table 4-45 COND_EFF Values
COND_EFF Values Description
CL Standing condition cleared
SC Standing condition raised
TC Transient condition
Table 4-46 CONDITION Values
CONDITION Values Description
ACOMAN Alarm cutoff is in manual mode
AIS External failure - Incoming - Alarm Indication Signal
AIS-L External failure - Incoming - Alarm Indication Signal - Line
AIS-P External failure - Incoming - Alarm Indication Signal - Path
AIS-V External failure - Incoming - Alarm Indication Signal - VT layer
ALM-SUPPRESS Alarms/Events Suppressed for this Object
APSB External failure - Incoming - Automatic Protection Switching
Channel - Byte failure
APSC External failure - Incoming - Automatic Protection Switching
Channel failure
APSC-IMP External failure - Incoming - Automatic Protection Switching-
Invalid K bytes
APSCCONNL External failure - Incoming -Automatic Protection Switching
-Connection Loss
APSCDFLTK External failure - Incoming -Automatic Protection Switching -Default
K byte
APSCINCON External failure - Incoming -Automatic Protection Switching
-Inconsistent
APSCM External failure - Incoming - Automatic Protection Switching
Channel - Protection Switching Channel Match failure
APSCNMIS APS Channel - BLSR - Node Id Mismatch
APSMM External failure - Incoming -Automatic Protection Switching Channel
- Automatic Protection Switch Mode Mismatch
AUTOLSROFF Internal hardware - Facility Termination Equipment - Automatic
Laser Shutdown
AUTORESET Recovery action - Automatic system Reset