Specifications

4-23
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 4 TL1 Command Components
Parameter Types
4.3.9 BLSR_TYPE
BLSR type of an OCN port
4.3.10 CCT
Defines the type of cross-connect to be created
4.3.11 CMD_MODE
Command mode is used to force the system to execute a given command regardless of any standing
conditions. Normal mode is the default behavior for all commands but the user may specify FRCD to
force the system to override a state in which the command would normally be denied.
Table 4-42 BLSR_TYPE Values
BLSR_TYPE Values Description
EASTPROT Identifies that the OCN port is an east protecting port
EASTWORK Identifies that the OCN port is an east working port
WESTPROT Identifies that the OCN port is a west protecting port
WESTWORK Identifies that the OCN port is a west working port
Table 4-43 CCT Values
CCT Values Description
1WAY A unidirectional connection from a source tributary to a destination tributary
1WAYDC UPSR mcast drop with (1-way) continue
1WAYEN UPSR mcast end node (1-way continue)
2WAY A bidirectional connection between the two tributaries
Table 4-44 CMD_MODE Values
CMD_MODE Values Description
FRCD Force the system to override a state in which the command would normally be
denied
NORM Execute the command normally. Do not override any conditions that may
make the command fail.