Specifications

4-14
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 4 TL1 Command Components
Access Identifiers
4.2.11 SYN
4.2.11.1 SYN for ONS 15454
Synchronization AIDs
4.2.11.2 SYN for ONS 15327
Synchronization AIDs
4.2.12 SYN_SRC
4.2.12.1 SYN_SRC for ONS 15454
Synchronization source
Table 4-26 SYN for ONS 15454
Pattern Description
SYNC-NE NE sync AID
Table 4-27 SYN for ONS 15327
Pattern Description
SYNC-NE NE sync AID
Table 4-28 SYN_SRC for ONS 15454
Pattern Description
BITS-1 Sync source is BITS-1
BITS-2 Sync source is BITS-2
FAC-{1-6,12-17}-{1-4} Sync source is the optical card (four-port OC3 and four-port OC12)
facility
FAC-{1-6,12-17}-{1} Sync source is the optical card (one-port OC12 and OC48AS) facility
FAC-{5,6,12,13}-{1} Sync source is the optical card (OC48,OC192) facility
INTERNAL Set the SYN_SRC to be the system default value. The “Internal” value
of the SYN_SRC is only applied for the SYNC-NE AID on the
ED-SYNCN command.
NONE Set the SYNC_SRC value to the default value for BITS-OUT. The
“NONE” value of SYNC_SRC only applies to the BITS-1 and BITS-2
AID of the ED-SYNCN command.
SYNC-NE SYNC-NE source. It is only used in the alarm report or alarm retrieve
commands.