Specifications

4-11
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 4 TL1 Command Components
Access Identifiers
4.2.8 EQPT
4.2.8.1 EQPT for ONS 15454
Equipment AIDs are used to access specific cards. The OC48/OC192 cards can only use the high speed
slots (Slot 5, Slot 6, Slot 12, Slot 13).
4.2.8.2 EQPT for ONS 15327
Equipment AIDs are used to access specific cards. The I/O cards can only use the I/O slots (Slots 1–4).
Slots 5a nd 6 are reserved for the XTC cards and Slots 7 and 8 are reserved for MIC cards.
4.2.9 FACILITY
4.2.9.1 FACILITY for ONS 15454
Facilities AIDs are used to access specific ports.
Table 4-20 EQPT for ONS 15454
Pattern Description
AIP The AID for the AIP. It is used for RTRV-INV output only.
ALL The ALL AID is only used for the RTRV-INV input command. It
reports all of the inventory information of the whole NE: AIP, BP,
FAN and SLOT-ALL.
BP The AID for the backplane. It is used for RTRV-INV output only.
FAN The AID for the fan tray. It is used for RTRV-INV output only.
SLOT-ALL All of the NE equipment AIDs
SLOT-{1-17} Individual equipment AID of an NE
SLOT-{1-6,12-17} Individual equipment AID of the I/O card units or slots
Table 4-21 EQPT for ONS 15327
Pattern Description
SLOT-ALL All of the NE equipment AIDs
SLOT-{1-8} Individual equipment AID of an NE
Table 4-22 FACILITY for ONS 15454
Pattern Description
FAC-{1-6,12-17}-ALL All the facilities of an I/O unit or slot
FAC-{1-6,12-17}-{1-12} Facilities AID for the EC1 and DS3 cards
FAC-{1-6,12-17}-{1-14} Facilities for the DS1 card
FAC-{1-6,12-17}-{1-4} Facilities for the four-port OC3 card and four-port OC12 card