Specifications

4-5
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 4 TL1 Command Components
Access Identifiers
4.1.9 Synchronization
4.2 Access Identifiers
The AID code directs an input command to its intended physical or data entity inside the NE. Equipment
modules and facilities are typical examples of entities addressed by the access code.
4.2.1 ALL
Table 4-9 Synchronization
Synchronization Default
BITS LINECDE defaults to B8ZS.
FMT defaults to ESF.
SYNCMSG defaults to Y.
PST defaults to OOS.
NE-SYNCN TMMDE defaults to EXTERNAL.
SSMGEN defaults to GEN1.
QRES defaults to SAM-AS-DUS.
RVRTV defaults to Y.
RVTM defaults to 5.0 minutes.
SYNCN PRI/SEC QRES defaults to ABOVE-STU.
PRI STATUS defaults to ACT.
SEC STATUS defaults to STBY.
THIRD QRES and STATUS defaults to NULL.
Table 4-10 ALL for ONS 15454 and ONS 15327
AID ONS 15454 ONS 15327
CrossConnect ID FACILITY
STS
—
PRSLOT NULL
SLOT-1
SLOT-3
SLOT-5
SLOT-13
SLOT-15
SLOT-17
—
BITS BITS-ALL
BITS-{1,2}
BITS-ALL
BITS-{1,2}
BLSR ALL
BLSR-{0-9999}
ALL
BLSR-ALL
BLSR-{0-9999}
DS1 DS1-{1-6,12-17}-{1-6}-{1-28} —