Specifications

xxiii
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
About This Manual
This section explains who should read the Cisco ONS 15454 and Cisco ONS 15327 TL1 Command
Guide, how the document is organized, related documentation, document conventions, how to order print
and CD-ROM documentation, and how to obtain technical assistance.
Audience
This guide is for Cisco ONS 15454 and Cisco ONS 15327 technicians and administrators who are
responsible for installing, configuring, maintaining, and enhancing ONS 15454 and ONS 15327
networks.
Organization
Chapter Description
Chapter 1, “Getting Started” Explains how to gain access to TL1, command syntax,
autonomous messages, provision a DS3E card in CTC
using TL1, security level privileges associated with
each command, command completion behavior and
test access configurations.
Chapter 2, “TL1 Gateway” Describes the TL1 Gateway and provides procedures
and examples for implementing
TL1 Gateway on a four node ring.
Chapter 3, “TL1 Command Descriptions” Lists TL1 commands by category and then lists each
command and autonomous message supported by the
ONS 15454 and the ONS 15327.
Chapter 4, “TL1 Command Components” Describes the components of TL1 commands
including, default values, access identifiers (AIDs),
and parameter types.
Chapter 5, “Ring Provisioning” Provides sample procedures for setting up STS or VT
circuits over existing unidirectional path switched ring
(UPSR) and bidirectional line switch ring (BLSR)
configurations.