Specifications

3-176
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.125 SET-TH-<MOD2>: Set Threshold (DS1, EC1, OC3, OC12,OC48, OC192,
STS1, STS3C, STS6C, STS9C, STS12C, STS24C, STS48C, STS192C,T1, T3, VT1)
(DS1, EC1, OC192, STS192C supported for ONS 15454 only)
This command sets the threshold of PM parameters.
3.5.126 SET-TOD: Set Time of Day
This command sets the system date and time for the NE. The year should be entered using four digits
while the hour should be entered using a 24-hour time period (i.e. military time).
Section SET-TH-<MOD2> Description
Category Performance
Security Provisioning
Related
Messages
INIT-REG-<MOD2>
RTRV-PM-<MOD2>
RTRV-PMMODE-<STS_PATH>
RTRV-TH-<MOD2>
SET-PMMODE-<STS_PATH>
Input Format
SET-TH-<MOD2>:[<TID>]:<AID>:<CTAG>::<MONTYPE>,
<THLEV>,[<LOCN>],,[<TMPER>];
where:
• <AID> indicates the access identifier. All the STS, VT1, Facility and DS1 AIDs
are supported and <AID> is from the “ALL” section on page 4-5
• <MONTYPE> is the monitored value; valid values for <MONTYPE> are shown
in the “ALL_MONTYPE” section on page 4-19
• <THLEV> is the threshold value and is an integer
• <LOCN> is the location; valid values for <LOCN> are shown in the
“LOCATION” section on page 4-42
• <TMPER> is the accumulation time period for the PM information; valid values
for <TMPER> are shown in the “TMPER” section on page 4-63
Input Example SET-TH-T3:CISCO:FAC-1-1:123::CVL,12,NEND,,15-MIN;
Errors This message generates all the default errors
Section SET-TOD Description
Category System
Security Provisioning
Related
Messages
ALW-MSG-ALL RTRV-HDR
ED-DAT RTRV-INV
ED-NE-GEN RTRV-NE-GEN
ED-NE-SYNCN RTRV-NE-IPMAP
INH-MSG-ALL RTRV-NE-SYNCN
INIT-SYS RTRV-TOD