Specifications

3-160
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.113 RTRV-PM-<MOD2>: Retrieve Performance (DS1, EC1, OC3, OC12, OC48,
OC192, STS1, STS3C, STS6C, STS9C, STS12C, STS24C, STS48C, STS192C, T1, T3,
VT1)
(DS1, EC1, OC192, STS192C supported for ONS 15454 only)
This command retrieves the values of PM parameters for a specified card type.
<MONTYPE>, <MONLEV>, <MONDAT> and <MONTM> are supported in this release.
<MONLEV> is in the format of LEV-DIRN. Valid values for <DIRN> are shown in the “DIRN” section
on page 4-35.
The format of <MONDAT> is MM-DD, where MM (month of the year) ranges from 1–12 and DD (day
of the month) ranges from 1–31.
The format for <MONTM> is HH-MM, where HH (hour of the day) ranges from 0–23 and MM (minute
of the hour) ranges from 0–59.
Notes:
1. If the <TMPER> is 1-DAY, <MONTM> is not applicable (null), and is treated as null if <MONTM>
is not null.
2. A null value for <MONLEV> defaults to 1-UP.
3. A null value for <MONDAT> defaults to the current date (MM-DD).
4. A null value for <MONTM> defaults to the current time (HH-MM).
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“::TMMD=LINE,SSMGEN=GEN1,QRES=ABOVE-PRS,RVRTV=Y,RVTM=8.0”
;
Errors This message generates all the default errors
Section RTRV-NE-SYNCN Description (continued)
Section RTRV-PM-<MOD2> Description
Category Performance
Security Retrieve
Related
Messages
INIT-REG-<MOD2>
RTRV-PMMODE-<STS_PATH>
RTRV-TH-<MOD2>
SET-PMMODE-<STS_PATH>
SET-TH-<MOD2>