Specifications

3-159
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.112 RTRV-NE-SYNCN: Retrieve Network Element Synchronization
This command is used to retrieve the synchronization attributes of the NE.
Notes:
1. Although mixed mode timing is supported in this release, it is not recommended. See the “Mixed
Mode Timing Support” section on page 1-7 for more information.
2. The existing external and line modes have the same functionality in all 3.x releases:
– External mode: the node derives its timing from the BITS inputs.
– Line mode: the node derives its timing from the SONET line(s).
– Mixed mode: the node derives its timing from the BITS input or SONET lines.
Section RTRV-NE-SYNCN Description
Category Synchronization
Security Retrieve
Related
Messages
ALW-MSG-ALL RLS-SYNCNSW
ED-BITS RTRV-ALM-BITS
ED-DAT RTRV-ALM-SYNCN
ED-NE-GEN RTRV-BITS
ED-NE-SYNCN RTRV-COND-BITS
ED-SYNCN RTRV-COND-SYNCN
INH-MSG-ALL RTRV-HDR
INIT-SYS RTRV-INV
OPR-SYNCNSW RTRV-NE-GEN
REPT ALM BITS RTRV-NE IPMAP
REPT ALM SYNCN RTRV-SYNCN
REPT EVT BITS RTRV-TOD
REPT EVT SYNCN SET-TOD
Input Format RTRV-NE-SYNCN:[<TID>]::<CTAG>[::::];
Input Example RTRV-NE-SYNCN:CISCO::123;
Output Format SID DATE TIME
M CTAG COMPLD
“::[TMMD=<TMMD>,][SSMGEN=<SSMGEN>,][QRES=<QRES>,]
[RVRTV=<RVRTV>,][RVTM=<RVTM>]”
;
where:
• <TMMD> is the timing mode; valid values for <TMMD> are shown in the
“TIMING_MODE” section on page 4-63, <TMMD> is optional
• <SSMGEN> is the SSM generator; valid values for <SSMGEN> are shown in the
“SYNC_GENERATION” section on page 4-60, <SSMGEN> is optional
• <QRES> is the quality of RES; valid values for <QRES> are shown in the
“SYNC_QUALITY_LEVEL” section on page 4-61, <QRES> is optional
• <RVRTV> is the revertive mode; valid values for <RVRTV> are shown in the
“ON_OFF” section on page 4-51, <RVRTV> is optional
• <RVTM> is the revertive time; valid values for <RVTM> are shown in the
“REVERTIVE_TIME” section on page 4-55, <RVTM> is optional