Specifications

3-157
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.110 RTRV-NE-GEN: Retrieve Network Element General
This command is used to retrieve the general NE attributes.
Section RTRV-NE-GEN Description
Category System
Security Retrieve
Related
Messages
ALW-MSG-ALL RTRV-HDR
ED-DAT RTRV-INV
ED-NE-GEN RTRV-NE-IPMAP
ED-NE-SYNCN RTRV-NE-SYNCN
INH-MSG-ALL RTRV-TOD
INIT-SYS SET-TOD
Input Format RTRV-NE-GEN:[<TID>]::<CTAG>;
Input Example RTRV-NE-GEN:CISCO::123;
Output Format SID DATE TIME
M CTAG COMPLD
“[IPADDR=<IPADDR>,][IPMASK=<IPMASK>,][DEFRTR=<DEFRTR>,]
[NTP=<NTP>,][NAME=<NAME>,][SWVER=<SWVER>,][LOAD=<LOAD>]”
;
where:
• <IPADDR> indicates the node IP address; <IPADDR> is a string and is optional
• <IPMASK> indicates the node IP mask; <IPMASK> is a string and is optional
• <DEFRTR> indicates the node default router; <DEFRTR> is a string and is
optional
• <NTP> indicates the node’s NTP timing source address; <NTP> is a string and
is optional
• <NAME> is the node name; <NAME> is a string and is optional
• <SWVER> is the software version; <SWVER> is a string and is optional
• <LOAD> is the load version; <LOAD> is a string and is optional
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“IPADDR=192.168.100.52,IPMASK=255.255.255.0,
DEFRTR=192.168.100.1,NTP=192.168.100.52,NAME=NODENAME,
SWVER=2.01.03,LOAD=02.13-E09A-08.15”
;
Errors This message generates all the default errors