Specifications

3-156
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
Output Format
SID DATE TIME
M CTAG COMPLD
“<AID>,<ALMNUMBER>:CURRENT=<CURRENT>,
[PREVIOUS=<PREVIOUS>,]<CONDITION>,<SRVEFF>,
[TIME=<OCRTIME>,][DATE=<OCRDAT>]:<ALMDESCR>”
;
where:
• <AID> is the access identifier from the “ALL” section on page 4-5
• <ALMNUMBER> is the alarm number of the log and is an integer
• <CURRENT> is the current severity; valid values for <CURRENT> are shown
in the “NOTIF_CODE” section on page 4-49
• <PREVIOUS> is the previous severity; valid values for <PREVIOUS> are
shown in the “COND_EFF” section on page 4-24, <PREVIOUS> is optional
• <CONDITION> is the condition; valid values for <CONDITION> are shown in
the “CONDITION” section on page 4-24
• <SRVEFF> is the service effect; valid values for <SRVEFF> are shown in the
“SERV_EFF” section on page 4-56
• <OCRTIME> is the time an alarm is triggered; <OCRTIME> is a Time and is
optional
• <OCRDAT> is the date an alarm is triggered; <OCRDAT> is a Date and is
optional
• <ALMDESCR> is the alarm description and is a string
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“FAC-3-1,18:CURRENT=MJ,PREVIOUS=CL,EOC,NSA,TIME=16-33-04,
DATE=1971-02-03:\“SDCC TERMINATION FAILURE\””
;
Errors This message generates all the default errors
Section RTRV-LOG Description (continued)