Specifications

3-155
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.109 RTRV-LOG: Retrieve Log
This command retrieves the alarm log of the NE.
Note The only option reported for LOGNM is ALARM.
Output Format SID DATE TIME
M CTAG COMPLD
“<AID>,<AIDTYPE>::[PN=<PN>,][HWREV=<HWREV>,]
[FWREV=<FWREV>,][SN=<SN>,][CLEI=<CLEI>]”
;
where:
• <AID> is the access identifier from the “EQPT” section on page 4-11
• <AIDTYPE> specifies the type of AID and is a string
• <PN> is the HW part number; <PN> is a string and is optional
• <HWREV> is the HW Rev; <HWREV> is a string and is optional
• <FWREV> is the firmware Rev; <FWREV> is a string and is optional
• <SN> is the serial number; <SN> is a string and is optional
• <CLEI> is a string and is optional
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“SLOT-15,OC3-IR-4::PN=87-31-00002,HWREV=004K,
FWREV=76-99-00009-004A,SN=013510,CLEI=NOCLEI”
;
Errors This message generates all the default errors
Section RTRV-INV Description (continued)
Section RTRV-LOG Description
Category Log
Security Superuser
Related
Messages
ALW-MSG-DBCHG
INH-MSG-DBCHG
REPT DBCHG
Input Format RTRV-LOG:[<TID>]::<CTAG>::<LOGNM>;
where:
• <LOGNM> is the log name - ALARM; <LOGNM> is a string and must not be
null
Input Example RTRV-LOG:CISCO::123::ALARM;