Specifications

3-154
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.107 RTRV-HDR: Retrieve Header
This command instructs the NE to return the header of a TL1 response message. Used by TL1 clients to
determine if the link to the NE is still active and if the NE is responding to commands.
3.5.108 RTRV-INV: Retrieve Inventory
This command queries the NE and returns a listing of the equipment inventory. For each unit in the
system, it identifies the unit's firmware numbers and the unit's CLEI code.
.
Section RTRV-HDR Description
Category System
Security Retrieve
Related
Messages
ALW-MSG-ALL RTRV-INV
ED-DAT RTRV-NE-GEN
ED-NE-GEN RTRV-NE-IPMAP
ED-NE-SYNCN RTRV-NE-SYNCN
INH-MSG-ALL RTRV-TOD
INIT-SYS SET-TOD
Input Format RTRV-HDR:[<TID>]::<CTAG>;
Input Example RTRV-HDR:SONOMA::232;
Errors This message generates all the default errors
Section RTRV-INV Description
Category System
Security Retrieve
Related
Messages
ALW-MSG-ALL RTRV-HDR
ED-DAT RTRV-NE-GEN
ED-NE-GEN RTRV-NE-IPMAP
ED-NE-SYNCN RTRV-NE-SYNCN
INH-MSG-ALL RTRV-TOD
INIT-SYS SET-TOD
Input Format RTRV-INV:[<TID>]:<AID>:<CTAG>[::::];
where:
• <AID> is the access identifier from the “EQPT” section on page 4-11 and must
not be null
Input Example RTRV-INV:OCCIDENTAL:SLOT-15:301;