Specifications

3-149
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
Output Format SID DATE TIME
M CTAG COMPLD
“<AID>:<AIDTYPE>,<EQUIP>,[<ROLE>],[<STATUS>]:
[PROTID=<PROTID>,][PRTYPE=<PRTYPE>,][RVRTV=<RVRTV>,]
[RVTM=<RVTM>,][CARDNAME=<CARDNAME>]:[<PST>]”
;
where:
• <AID> is the equipment unit identifier and is from the“EQPT” section on
page 4-11
• <AIDTYPE> is a string
• <EQUIP> indicates if the equipment unit is physically present; valid values for
<EQUIP> are shown in the “EQUIP” section on page 4-40
• <ROLE> indicates if the card is the working unit or the protecting unit; valid
values for <ROLE> are shown in the “SIDE” section on page 4-56, <ROLE> is
optional
• <STATUS> indicates the status. SONET card status is shown on it’s line/port
level. Valid values for <STATUS> are shown in the “STATUS” section on
page 4-57, <STATUS> is optional
• <PROTID> indicates the protecting identifier; <PROTID> is the AID “PRSLOT”
section on page 4-8 and is optional
• <PRTYPE> indicates the protection type; valid values for <PRTYPE> are shown
in the “PROTECTION_GROUP” section on page 4-53, <PRTYPE> is optional
• <RVRTV> indicates the revertive mode; valid values for <RVRTV> are shown in
the “ON_OFF” section on page 4-51, <RVRTV> is optional
• <RVTM> indicates the revertive time; valid values for <RVTM> are shown in the
“REVERTIVE_TIME” section on page 4-55, <RVTM> is optional
• <CARDNAME> indicates the card name from the hardware. It will be empty for
the preprovisioned card; <CARDNAME> is a string and is optional
• <PST> indicates the state; valid values for <PST> are shown in the “PST” section
on page 4-53, <PST> is optional
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“SLOT-12:DS1,EQUIP,,ACT:PROTID=SLOT-13,PRTYPE=1-1,
RVRTV=Y,RVTM=8.5,CARDNAME=DESCRIPTION:IS”
;
Errors This message generates all the default errors
Section RTRV-EQPT Description (continued)