Specifications

3-147
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.102 RTRV-EC1: Retrieve EC1
(Cisco ONS 15454 only)
This command retrieves the facility status of an EC1 card.
Section RTRV-EC1 Description
Category Ports
Security Retrieve
Related
Messages
ED-<OCN_TYPE> RST-<MOD_PORT>
ED-DS1 RTRV-<OCN_TYPE>
ED-EC1 RTRV-DS1
ED-G1000 RTRV-G1000
ED-T1 RTRV-T1
ED-T3 RTRV-T3
RMV-<MOD_PORT>
Input Format RTRV-EC1:[<TID>]:<aid>:<CTAG>[::::];
where:
• <AID> is from the “FACILITY” section on page 4-11 and must not be null
Input Example RTRV-EC1:CISCO:FAC-1-1:1234;
Output Format SID DATE TIME
M CTAG COMPLD
“<AID>::[PJMON=<PJMON>,][LBO=<LBO>,][RXEQUAL=<RXEQUAL>]:
[<PST>]”
;
where:
• <AID> is the facility AID of an EC1 port and is from the “FACILITY” section
on page 4-11
• <PJMON> is the SONET pointer monitor attribute of an EC1 port; <PJMON> is
an integer and is optional
• <LBO> is the line build-out value of an EC1 port; valid values for <LBO> are
shown in the “E_LBO” section on page 4-36, <LBO> is optional
• <RXEQUAL> is the Rx Equalization attribute of an EC1 port and is always in Y
(enabled) state; valid values for <RXEQUAL> are shown in the “ON_OFF”
section on page 4-51, <RXEQUAL> is optional
• <PST> is the state of an EC1 port; valid values for <PST> are shown in the “PST”
section on page 4-53, <PST> is optional
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“FAC-1-1::PJMON=0,LBO=0-225,RXEQUAL=Y:IS”
;
Errors This message generates all the default errors