Specifications

3-143
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
Section RTRV-CRS-<STS_PATH> Description
Category Cross Connections
Security Retrieve
Related
Messages
DLT-CRS-<STS_PATH>
DLT-CRS-VT1
ENT-CRS-<STS_PATH>
ENT-CRS-VT1
RTRV-CRS-VT1
Input Format RTRV-CRS-<STS_PATH>:[<TID>]:<AID>:<CTAG>[::::];
where:
• <AID> identifies STS to check for connection membership. <AID> can be a
Facility, STS, or ALL AID. The ALL AID defaults to NE which reports all the
existing cross connections of the NE. The STS_PATH does not include STS for
the RTRV-CRS command because STS is not a standard designator as defined
by GR-833 A-2. <AID> is from the “CrossConnectID” section on page 4-7 and
must not be null.
Input Example RTRV-CRS-STS3C:KENWOOD:STS-6-1:223;
Output Format SID DATE TIME
M CTAG COMPLD
“<FROM>,<TO>:<CCT>,<LEVEL>”
;
where:
• <FROM> identifies an entity at one end of the STS cross connection and is the
AID from the “CrossConnectID” section on page 4-7
• <TO> identifies an entity at the other end of the STS cross connection and is the
AID from the “CrossConnectID” section on page 4-7
• <CCT> identifies the cross connection type; valid values for <CCT> are shown
in the “CCT” section on page 4-23
• <LEVEL> indicates the rate of the cross connected channel; valid values for
<LEVEL> are shown in the “STS_PATH” section on page 4-59
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“STS-6-1,STS-12-4:2WAY,STS3C”
;
Errors This message generates all the default errors