Specifications

3-142
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
If retrieved on point f1 or f2, the output format is the same as the 1-way output.
If retrieved on point t1, the output will be:
“t1,f1&f2:CCT,STS3C”
To retrieve a 1-way bridge or 2-way selector and bridge cross connection with:
from point: f1
to points: t1, t2
the output will be:
1-way
“f1,t1&t2:CCT,STS3C”
2-way
“t1&t2,f1:CCT,STS3C”
To retrieve a 1-way subtending UPSR connection or 2-way subtending UPSR cross connection with:
from point: f1, f2
to points: t1, t2
the output will be:
1-way:
“f1&f2,t1&t2:CCT,STS3C”
2-way:
If retrieved on point f1 or f2, the output format is the same as the 1-way output.
If retrieved on point t1 or t2, the output will be:
“t1&t2,f1&f2:CCT,STS3C”
To retrieve a 2-way selector and bridge cross connection with:
ENT-CRS-<STS_PATH>::F1&F2,S1&S2:8::2WAY;
from points: f1, f2 (f1 is the working side, f2 is the protect side)
selector: s1, s2 (s1 is the working side, s2 is the protect side)
the output will be:
If retrieved on point f1 or f2, the output will be:
“f1&f2,s1&s2:CCT,STS3C”
If retrieved on selector s1 or s2, the output will be:
“s1&s2,f1&f2:CCT,STS3C”
2. All a&b AIDs in the TL1 cross connection command are in the format of WorkingAid&ProtectAid.
3. <STS_PATH> does not include STS for the RTRV-CRS command because “STS” is not a standard
designator as defined by GR-833 A-2.
4. Both the 1WAYPCA and 2WAYPCA is used to specify a PCA cross connection.
5. The facility AID is only valid on slots with a G1000-4 card.