Specifications

3-141
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.99 RTRV-CRS-<STS_PATH>: Retrieve Cross Connect (STS1, STS3C, STS6C,
STS9C, STS12C, STS24C, STS48C, STS192C)
(STS192C supported for ONS 15454 only)
This command retrieves any connections associated with the entered AID(s) or AID range. The
information on both ends is returned along with the type of connection.
Notes:
1. The UPSR STS cross connection can be retrieved by using “&” in the AID fields of this command.
To retrieve a 1-way selector or 2-way selector and bridge cross connection with:
from points: f1, f2
to points: t1
the output will be:
1-way
“f1&f2,t1:CCT,STS3C”
2-way
Output Format SID DATE TIME
M CTAG COMPLD
“<AID>,[<AIDTYPE>]:[<NTFCNCDE>],<TYPEREQ>,[<SRVEFF>],,,,,
[<DESC>]”
;
where:
• <AID> is the identifier that has an alarm condition and is from the “SYN”
section on page 4-14
• <AIDTYPE> is the type of AID. It is always reported as SYNCN; valid values
for <AIDTYPE> are shown in the “MOD2B” section on page 4-45,
<AIDTYPE> is optional
• <NTFCNCDE> is the notification code; valid values for <NTFCNCDE> are
shown in the “NOTIF_CODE” section on page 4-49, <NTFCNCDE> is optional
• <TYPEREQ> is the type of condition to be retrieved; valid values for
<TYPEREQ> are shown in the “CONDITION” section on page 4-24
• <SRVEFF> is the effect on service caused by the alarm condition; valid values
for <SRVEFF> are shown in the “SERV_EFF” section on page 4-56,
<SRVEFF> is optional
• <DESC> is the condition description; <DESC> is a string and is optional
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“SYNC-NE,SYNCN:MJ,FRNGSYNC,SA,,,,,
\“FREE RUNNING SYNCHRONIZATION MODE\””
;
Errors This message generates all the default errors
Section RTRV-COND-SYNCN Description (continued)