Specifications
3-140
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.98 RTRV-COND-SYNCN: Retrieve Condition Synchronization
This command retrieves the synchronization condition.
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“RING-88:MN,RING-MISMATCH,SA,,,,,
\“FAR END OF FIBER IS PROVISIONED WITH DIFFERENT RING ID\”,”
;
Errors This message generates all the default errors
Section RTRV-COND-RING Description (continued)
Section RTRV-COND-SYNCN Description
Category Synchronization
Security Retrieve
Related
Messages
ED-BITS RTRV-ALM-ALL
ED-NE-SYNCN RTRV-ALM-BITS
ED-SYNCN RTRV-ALM-ENV
OPR-SYNCNSW RTRV-ALM-EQPT
REPT ALM <MOD2ALM> RTRV-ALM-RING
REPT ALM BITS RTRV-ALM-SYNCN
REPT ALM COM RTRV-BITS
REPT ALM ENV RTRV-COND-<MOD2ALM>
REPT ALM EQPT RTRV-COND-ALL
REPT ALM RING RTRV-COND-BITS
REPT ALM SYNCN RTRV-COND-ENV
REPT EVT BITS RTRV-COND-EQPT
REPT EVT COM RTRV-COND-RING
REPT EVT SYNCN RTRV-NE-SYNCN
RLS-SYNCNSW RTRV-SYNCN
RTRV-ALM-<MOD2ALM>
Input Format RTRV-COND-SYNCN:[<TID>]:<AID>:<CTAG>::[<TYPEREQ>][,,,];
where:
• <AID> is the identifier that has an alarm condition; <AID> is from the “SYN”
section on page 4-14 and must not be null
• <TYPEREQ> is the type of condition to be retrieved; valid values are shown in
the “CONDITION” section on page 4-24. A null value is equivalent to ALL.
Input Example RTRV-COND-SYNCN:TID:SYNC-NE:229::LOS;