Specifications

3-139
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.97 RTRV-COND-RING: Retrieve Condition Ring
This command retrieves the current standing condition against a ring object for BLSR.
Note When a change is made to a BLSR, including creating a new circuit, the circuit will not have BLSR
protection until after the BLSR-UPDATED message is received.
Section RTRV-COND-RING Description
Category BLSR
Security Retrieve
Related
Messages
ED-BLSR RTRV-ALM-BITS
REPT ALM <MOD2ALM> RTRV-ALM-ENV
REPT ALM BITS RTRV-ALM-EQPT
REPT ALM COM RTRV-ALM-RING
REPT ALM ENV RTRV-ALM-SYNCN
REPT ALM EQPT RTRV-BLSR
REPT ALM RING RTRV-COND-<MOD2ALM>
REPT ALM SYNCN RTRV-COND-ALL
REPT EVT COM RTRV-COND-BITS
REPT EVT RING RTRV-COND-ENV
RTRV-ALM-<MOD2ALM> RTRV-COND-EQPT
RTRV-ALM-ALL RTRV-COND-SYNCN
Input Format RTRV-COND-RING:[<TID>]:[<AID>]:<CTAG>::[<TYPEREQ>][,,,];
where:
• <AID> identifies a BLSR ID with alarm condition; <AID> is a string and a null
value is equivalent to ALL
• Valid values for <TYPEREQ> are shown in the “CONDITION” section on
page 4-24 and a null value is equivalent to ALL
Input Example RTRV-COND-RING:CISCO:RING-88:123::RING-MISMATCH;
Output Format SID DATE TIME
M CTAG COMPLD
“<AID>:[<NTFCNCDE>],<TYPEREQ>,[<SRVEFF>],,,,,[<DESC>]”
;
where:
• <AID> identifies a BLSR ID with alarm condition and is a string
• Valid values for <NTFCNCDE> are shown in the “NOTIF_CODE” section on
page 4-49. <NTFCNCDE> is optional.
• Valid values for <TYPEREQ> are shown in the “CONDITION” section on
page 4-24
• <SRVEFF> is the effect on service caused by the alarm condition; valid values
for <SRVEFF> are shown in the “SERV_EFF” section on page 4-56.
<SRVEFF> is optional.
• <DESC> is a string and is optional