Specifications

3-137
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.96 RTRV-COND-EQPT: Retrieve Condition Equipment
This command retrieves the condition equipment.
Output Format SID DATE TIME
M CTAG COMPLD
“<AID>:<NTFCNCDE>,<ALMTYPE>,,,,,,[<DESC>]”
;
where:
• <AID> is the access identifier and is from the “ENV” section on page 4-10
• <NTFCNCDE> is the notification code; valid values for <NTFCNCDE> are
shown in the “NOTIF_CODE” section on page 4-49
• <ALMTYPE> is the alarm type for the environmental alarm; valid values for
<ENVALM> are shown in the “ENV_ALM” section on page 4-36
• <DESC> is the description of the condition; <DESC> is a string and is optional
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“ENV-IN-1:MJ,OPENDR,,,,,,\“OPEN DOOR\””
;
Errors This message generates all the default errors
Section RTRV-COND-ENV Description (continued)
Section RTRV-COND-EQPT Description
Category Equipment
Security Retrieve
Related
Messages
ALW-SWDX-EQPT RTRV-ALM-<MOD2ALM>
ALW-SWTOPROTN-EQPT RTRV-ALM-ALL
ALW-SWTOWKG-EQPT RTRV-ALM-BITS
DLT-EQPT RTRV-ALM-ENV
ED-EQPT RTRV-ALM-EQPT
ENT-EQPT RTRV-ALM-RING
INH-SWDX-EQPT RTRV-ALM-SYNCN
INH-SWTOPROTN-EQPT RTRV-COND-<MOD2ALM>
INH-SWTOWKG-EQPT RTRV-COND-ALL
REPT ALM <MOD2ALM> RTRV-COND-BITS
REPT ALM BITS RTRV-COND-ENV
REPT ALM COM RTRV-COND-RING
REPT ALM ENV RTRV-COND-SYNCN
REPT ALM EQPT RTRV-EQPT
REPT ALM RING SW-DX-EQPT
REPT ALM SYNCN SW-TOPROTN-EQPT
REPT EVT COM SW-TOWKG-EQPT
REPT EVT EQPT