Specifications

3-136
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.95 RTRV-COND-ENV: Retrieve Condition Environment
This command retrieves the environmental conditions.
Section RTRV-COND-ENV Description
Category Environmental Alarms and Controls
Security Retrieve
Related
Messages
OPR-EXT-CONT RTRV-ALM-EQPT
REPT ALM <MOD2ALM> RTRV-ALM-RING
REPT ALM BITS RTRV-ALM-SYNCN
REPT ALM COM RTRV-ATTR-CONT
REPT ALM ENV RTRV-ATTR-ENV
REPT ALM EQPT RTRV-COND-<MOD2ALM>
REPT ALM RING RTRV-COND-ALL
REPT ALM SYNCN RTRV-COND-BITS
REPT EVT COM RTRV-COND-EQPT
REPT EVT ENV RTRV-COND-EQPT
RLS-EXT-CONT RTRV-COND-RING
RTRV-ALM-<MOD2ALM> RTRV-COND-SYNCN
RTRV-ALM-ALL RTRV-EXT-CONT
RTRV-ALM-BITS SET-ATTR-CONT
RTRV-ALM-ENV SET-ATTR-ENV
Input Format RTRV-COND-ENV:[<TID>]:<AID>:<CTAG>::[<NTFCNCDE>],[<ALMTYPE>]
[,,,];
where:
• <AID> is the identifier from the “ENV” section on page 4-10 and must not be
null
Note For RTRV-COND-ENV, only ENV-IN-{1-4} is a valid AID for ONS 15454
and only ENV-IN-{1-6} is a valid AID for ONS 15327. ENV-OUT-{1,6} is
not a valid AID for RTRV-COND-ENV.
• <NTFCNCDE> is the notification code; valid values for <NTFCNCDE> are
shown in the “NOTIF_CODE” section on page 4-49. A null value is equivalent
to ALL.
• <ALMTYPE> is the condition type for the environmental conditions; valid
values for <ALMTYPE> are shown in the “ENV_ALM” section on page 4-36.
A null value is equivalent to ALL.
Input Example RTRV-COND-ENV:CISCO:ENV-IN-1:123::MJ,OPENDR;