Specifications

3-134
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.94 RTRV-COND-BITS: Retrieve Condition Building Integrated Timing Supply
This command retrieves the standing conditions on BITS.
Section RTRV-COND-BITS Description
Category Synchronization
Security Retrieve
Related
Messages
ED-BITS RTRV-ALM-ALL
ED-NE-SYNCN RTRV-ALM-BITS
ED-SYNCN RTRV-ALM-ENV
OPR-SYNCNSW RTRV-ALM-EQPT
REPT ALM <MOD2ALM> RTRV-ALM-RING
REPT ALM BITS RTRV-ALM-SYNCN
REPT ALM COM RTRV-BITS
REPT ALM ENV RTRV-COND-<MOD2ALM>
REPT ALM EQPT RTRV-COND-ALL
REPT ALM RING RTRV-COND-ENV
REPT ALM SYNCN RTRV-COND-EQPT
REPT EVT BITS RTRV-COND-RING
REPT EVT COM RTRV-COND-SYNCN
REPT EVT SYNCN RTRV-NE-SYNCN
RLS-SYNCNSW RTRV-SYNCN
RTRV-ALM-<MOD2ALM>
Input Format RTRV-COND-BITS:[<TID>]:<AID>:<CTAG>::[<TYPEREQ>][,,,];
where:
• <AID> is the access identifier from the “BITS” section on page 4-9 and must
not be null
• <TYPEREQ> is the type of condition to be retrieved; valid values for
<TYPEREQ> are shown in the “CONDITION” section on page 4-24. A null
value is equivalent to ALL.
Input Example RTRV-COND-BITS:TID:BITS-1:229::LOS;