Specifications
3-133
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
Section RTRV-COND-ALL Description
Category Fault
Security Retrieve
Related
Messages
REPT ALM <MOD2ALM> RTRV-ALM-ENV
REPT ALM BITS RTRV-ALM-EQPT
REPT ALM COM RTRV-ALM-RING
REPT ALM ENV RTRV-ALM-SYNCN
REPT ALM EQPT RTRV-COND-<MOD2ALM>
REPT ALM RING RTRV-COND-BITS
REPT ALM SYNCN RTRV-COND-ENV
RTRV-ALM-<MOD2ALM> RTRV-COND-EQPT
RTRV-ALM-ALL RTRV-COND-RING
RTRV-ALM-BITS RTRV-COND-SYNCN
Input Format RTRV-COND-ALL:[<TID>]::<CTAG>::[<TYPEREQ>][,,,];
where:
• <TYPEREQ> is the type of condition to be retrieved; valid values for
<TYPEREQ> are shown in the “CONDITION” section on page 4-24. A null
value is equivalent to ALL.
Input Example RTRV-COND-ALL:TID::229::LOS;
Output Format SID DATE TIME
M CTAG COMPLD
“<AID>,[<AIDTYPE>]:[<NTFCNCDE>],<TYPEREQ>,[<SRVEFF>],,,,,
[<DESC>]”
;
where:
• <AID> is the identifier that has an alarm condition; <AID> is from the “ALL”
section on page 4-5
• <AIDTYPE> is the type of access identifier; valid values for <AIDTYPE> are
shown in the “MOD2B” section on page 4-45, <AIDTYPE> is optional
• <NTFCNCDE> is the notification code; valid values for <NTFCNCDE> are
shown in the “NOTIF_CODE” section on page 4-49, <NTFCNCDE> is optional
• <TYPEREQ> is the type of condition to be retrieved; valid values for
<TYPEREQ> are shown in the “CONDITION” section on page 4-24
• <SRVEFF> is the effect on service caused by the alarm condition; valid values
for <SRVEFF> are shown in the “SERV_EFF” section on page 4-56,
<SRVEFF> is optional
• <DESC> is the condition description; <DESC> is a string and is optional
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“FAC-2-1,OC3:CR,LOS,SA,,,,,\“LOS OF SIGNAL\””
;
Errors This message generates all the default errors