Specifications

3-132
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.93 RTRV-COND-ALL: Retrieve Condition All
This command retrieves the current standing condition for all entities.
According to GR-833, the RTRV-COND-ALL command only reports EQPT, COM, and rr (T1, T3, OCN,
EC1, STSN, VT1, and DS1) alarms.
To retrieve all the NE conditions, issue all of the following commands:
RTRV-COND-ALL
RTRV-COND-ENV
RTRV-COND-BITS
RTRV-COND-RING
RTRV-COND-SYNCN
RTRV-COND-ALL does not return all conditions that are returned by other, more specific RTRV-COND
commands. Instead it returns a subset of those conditions. This is a requirement from section 6.2.1.8.4
of GR-253-CORE. The specific requirements are R6-288, R6-289 and R6-290. Section 6.2.1.8.4 states
a retrieval that returns ALL conditions from a node (RTRV-COND-ALL) must omit any conditions that
are “same root cause” as other raised conditions. The section also states any retrieval of a subset of the
conditions from a node, regardless of how the subsetting occurs, should not omit these “same root cause”
conditions. RTRV-COND-STS1, for example, must include “same root cause” conditions in the set it
returns, while RTRV-COND-ALL must not.
Output Format SID DATE TIME
M CTAG COMPLD
“<AID>,[<AIDTYPE>]:[<NTFCNCDE>],<TYPEREQ>,[<SRVEFF>],,,,,
[<DESC>]”
;
where:
• <AID> is the identifier that has an alarm condition and is from the “ALL” section
on page 4-5
• Valid values for <AIDTYPE> are shown in the “MOD2ALM” section on
page 4-44, <AIDTYPE> is optional
• <NTFCNCDE> is the notification code; valid values for <NTFCNCDE> are
shown in the “NOTIF_CODE” section on page 4-49, <NTFCNCDE> is optional
• <TYPEREQ> is the condition itself; valid values for <TYPEREQ> are shown in
the “CONDITION” section on page 4-24
• <SRVEFF> is the effect on service caused by the alarm condition; valid values
for <SRVEFF> are shown in the “SERV_EFF” section on page 4-56, <SRVEFF>
is optional
• <DESC> is the condition description; <DESC> is a string and is optional
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“FAC-2-1,T3:CR,LOS,SA,,,,,\“LOS OF SIGNAL\””
;
Errors This message generates all the default errors
Section RTRV-COND-<MOD2ALM> Description (continued)