Specifications

3-131
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.92 RTRV-COND-<MOD2ALM>: Retrieve Condition (DS1, E100, E1000, EC1,
G1000, OC3, OC12, OC48, OC192, STS1, STS3C, STS6C, STS9C, STS12C, STS24C,
STS48C, STS192C, T1, T3, VT1)
(DS1, E1000, EC1, OC192, STS192C supported for ONS 15454 only.
This command retrieves the current standing condition and state associated with an entity.
Section RTRV-COND-<MOD2ALM> Description
Category Fault
Security Retrieve
Related
Messages
REPT ALM <MOD2ALM> RTRV-ALM-ENV
REPT ALM BITS RTRV-ALM-EQPT
REPT ALM COM RTRV-ALM-RING
REPT ALM ENV RTRV-ALM-SYNCN
REPT ALM EQPT RTRV-COND-ALL
REPT ALM RING RTRV-COND-BITS
REPT ALM SYNCN RTRV-COND-ENV
REPT EVT COM RTRV-COND-EQPT
RTRV-ALM-<MOD2ALM> RTRV-COND-RING
RTRV-ALM-ALL RTRV-COND-SYNCN
RTRV-ALM-BITS
Input Format RTRV-COND-<MOD2ALM>:[<TID>]:<AID>:<CTAG>::[<TYPEREQ>][,,,];
where:
• <AID> is the identifier that has an alarm condition; <AID> is from the “ALL”
section on page 4-5 and must not be null
• <TYPEREQ> is the type of condition to be retrieved; valid values for
<TYPEREQ> are shown in the “CONDITION” section on page 4-24. A null
value is equivalent to ALL.
Input Example RTRV-COND-T3:TID:FAC-2-1:229::LOS;