Specifications

3-130
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
Output Format SID DATE TIME
M CTAG COMPLD
“[<AID>]::[RINGID=<RINGID>,][NODEID=<NODEID>,][MODE=<MODE>,]
[RVRTV=<RVRTV>,][RVTM=<RVTM>,][SRVRTV=<SRVRTV>,]
[SRVTM=<SRVTM>,][EASTWORK=<EASTWORK>,]
[WESTWORK=<WESTWORK>,][EASTPROT=<EASTPROT>,]
[WESTPROT=<WESTPROT>]”
;
where:
• <AID> identifies the BLSR of the NE and is from the “BLSR” section on
page 4-9. <AID> is optional.
• <RINGID> identifies the BLSR ID of the NE and ranges from 0 to 9999;
<RINGID> is an integer and is optional
• <NODEID> identifies the BLSR node ID of the NE and ranges from 0 to 31;
<NODEID> is an integer and is optional
• <MODE> identifies the BLSR mode and can be 2-fiber or 4-fiber; valid values
for <MODE> are shown in the “BLSR_MODE” section on page 4-22
• <RVRTV> identifies the revertive mode and valid values for <RVRTV> are
shown in the “ON_OFF” section on page 4-51. <RVRTV> is optional.
• <RVTM> identifies the revertive time and is not allowed to be set while
<RVRTV> is N; valid values for <RVTM> are shown in the
“REVERTIVE_TIME” section on page 4-55 and <RVTM> is optional
• <SRVRTV> identifies the span revertive mode; valid values for <SRVRTV> are
shown in the “ON_OFF” section on page 4-51 and <SRVRTV> is optional
• <SRVTM> identifies the span revertive time and is not allowed to be set while
<SRVTV> is N; valid values for <SRVTM> are shown in the
“REVERTIVE_TIME” section on page 4-55. <SRVTM> is optional.
• <EASTWORK> identifies the east working facility and is the AID from the
“FACILITY” section on page 4-11; <EASTWORK> is optional
• <WESTWORK> identifies the west working facility and is the AID from the
“FACILITY” section on page 4-11; <WESTWORK> is optional
• <EASTPROT> identifies the east protecting facility and is the AID from the
“FACILITY” section on page 4-11; <EASTPROT> is optional
• <WESTPROT> identifies the west protecting facility and is the AID from the
“FACILITY” section on page 4-11; <WESTPROT> is optional
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“BLSR-43::RINGID=43,NODEID=3,MODE=4F,RVRTV=Y,RVTM=5.0,
SRVRTV=Y,SRVTM=5.0,EASTWORK=FAC-5-1,WESTWORK=FAC-6-1,
EASTPROT=FAC-12-1,WESTPROT=FAC-13-1”
;
Errors This message generates all the default errors
Section RTRV-BLSR Description (continued)