Specifications

3-129
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.91 RTRV-BLSR: Retrieve Bidirectional Line Switched Ring
This command retrieves the BLSR information of the NE. A two-fiber or four-fiber BLSR can be
retrieved.
Output examples:
4F BLSR
“BLSR-43::RINGID=43,NODEID=3,MODE=4F,RVRTV=Y,RVTM=5.0,SRVRTV=Y,SRVTM=5.0,
EASTWORK=FAC-5-1,WESTWORK=FAC-6-1,EASTPROT=FAC-12-1,WESTPROT=FAC-13-1”
2F BLSR
“BLSR-12::RINGID=12,NODEID=2,MODE=2F,RVRTV=Y,RVTM=5.0,EASTWORK=FAC-5-1,
WESTWORK=FAC-6-1”
Error conditions:
1. Only ALL, null, or single “BLSR-#” in the AID in is allowed in this command.
2. A null AID defaults to the AID ALL.
3. If the system fails on getting IOR, a SDBE (Status, Internal Data Base Error) error message will be
returned.
4. If the NE does not have BSLR, the TL1 session will return the COMPLD error message with empty
information to the user.
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“BITS-1::LINECDE=AMI,FMT=ESF,LBO=0-133,SYNCMSG=Y,
AISTHRSHLD=PRS:IS”
;
Errors This message generates all the default errors
Section RTRV-BITS Description (continued)
Section RTRV-BLSR Description
Category BLSR
Security Retrieve
Related
Messages
ED-BLSR
REPT ALM RING
REPT EVT RING
RTRV-ALM-RING
RTRV-COND-RING
Input Format RTRV-BLSR:[<TID>]:[<AID>]:<CTAG>[::::];
where:
• <AID> identifies the BLSR of the NE. Only ALL, NULL, or single “BLSR-#” in
<AID> is allowed; <AID> is from the “BLSR” section on page 4-9. A null value
is equivalent to ALL.
Input Example RTRV-BLSR:PETALUMA:ALL:123;