Specifications

3-127
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
Input Format RTRV-ATTR-ENV:[<TID>]:<AID>:<CTAG>::[<NTFCNCDE>],[<ALMTYPE>];
where:
• <AID> is the access identifier from the “ENV” section on page 4-10 and must
not be null
• <NTFCNCDE> is the notification code for the environmental alarm; valid
values for <NTFCNCDE> are shown in the “NOTIF_CODE” section on
page 4-49. A null value is equivalent to ALL.
• <ALMTYPE> is the alarm type for the environmental alarm; valid values for
<ALMTYPE> are shown in the “ENV_ALM” section on page 4-36. A null
value is equivalent to ALL.
Input Example RTRV-ATTR-ENV:CISCO:ENV-IN-1:123::MJ,OPENDR;
Output Format SID DATE TIME
M CTAG COMPLD
“<AID>:[<NTFCNCDE>],[<ALMTYPE>],[<DESC>]”
;
where:
• <AID> is the access identifier from the “ENV” section on page 4-10
• <NTFCNCDE> is the notification code for the environmental alarm; valid
values for <NTFCNCDE> are shown in the “NOTIF_CODE” section on
page 4-49, <NTFCNCDE> is optional
• <ALMTYPE> is the alarm type for the environmental alarm; valid values for
<ALMTYPE> are shown in the “ENV_ALM” section on page 4-36,
<ALMTYPE> is optional
• <DESC> is the alarm description; <DESC> is a string and is optional
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“ENV-IN-1:MJ,OPENDR,\“OPEN DOOR\””
;
Errors This message generates all the default errors
Section RTRV-ATTR-ENV Description (continued)