Specifications

3-126
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.89 RTRV-ATTR-ENV: Retrieve Attribute Environment
This command retrieves the attributes associated with an environmental alarm.
Input Format RTRV-ATTR-CONT:[<TID>]:<AID>:<CTAG>[::<CONTTYPE>];
where:
• <AID> identifies the external control for which attributes are being set; <AID>
is from the “ENV” section on page 4-10 and must not be null
• <CONTTYPE> is the type of external control; valid values for <CONTTYPE>
are shown in the “CONTTYPE” section on page 4-34. A null value is equivalent
to ALL.
Input Example RTRV-ATTR-CONT:CISCO:ENV-OUT-2:123::AIRCOND;
Output Format SID DATE TIME
M CTAG COMPLD
“<AID>:[<CONTTYPE>]”
;
where:
• <AID> identifies the external control for which attributes are being set and is
from the “ENV” section on page 4-10
• <CONTTYPE> is the type of external control; valid values for <CONTTYPE>
are shown in the “CONTTYPE” section on page 4-34 and <CONTTYPE> is
optional
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“ENV-OUT-2:AIRCOND”
;
Errors This message generates all the default errors
Section RTRV-ATTR-CONT Description (continued)
Section RTRV-ATTR-ENV Description
Category Environmental Alarms and Controls
Security Retrieve
Related
Messages
OPR-EXT-CONT RTRV-ATTR-CONT
REPT ALM ENV RTRV-COND-ENV
REPT EVT ENV RTRV-EXT-CONT
RLS-EXT-CONT SET-ATTR-CONT
RTRV-ALM-ENV SET-ATTR-ENV