Specifications

3-123
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
Input Format RTRV-ALM-RING:[<TID>]:[<AID>]:<CTAG>::[<NTFCNCDE>],
[<CONDITION>],[<SRVEFF>][,,,];
where:
• <AID> identifies a BLSR ID with alarm condition; <AID> is a string and a null
value is equivalent to ALL.
• <NTFCNCDE> is a notification code; valid values for <NTFCNCDE> are shown
in the “NOTIF_CODE” section on page 4-49 and a null value is equivalent ALL.
• <CONDITION> indicates a BLSR alarm condition; valid values for
<CONDITION> are shown in the “CONDITION” section on page 4-24 and a
null value is equivalent to ALL.
• <SRVEFF> is the effect on service caused by the alarm condition; valid values
for <SRVEFF> are shown in the “SERV_EFF” section on page 4-56 and a null
value is equivalent to ALL.
Input Example RTRV-ALM-RING:CISCO:RING-999:123::MJ,PRC-DUPID,SA;
Output Format SID DATE TIME
M CTAG COMPLD
“<AID>:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,,,,:[<DESC>]”
;
where:
• <AID> identifies a BLSR ID with alarm condition and is from the “ALL” section
on page 4-5
• <NTFCNCDE> is a notification code; valid values for <NTFCNCDE> are shown
in the “NOTIF_CODE” section on page 4-49
• <CONDTYPE> indicates a BLSR alarm condition; valid values for
<CONDTYPE> are shown in the “CONDITION” section on page 4-24
• <SRVEFF> is the effect on service caused by the alarm condition; valid values
for <SRVEFF> are shown in the “SERV_EFF” section on page 4-56
• <DESC> is a condition description; <DESC> is a string and is optional
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“RING-999:MJ,PRC-DUPID,SA,,,,:\“DUPLICATE NODE ID\”,”
;
Errors This message generates all the default errors
Section RTRV-ALM-RING Description (continued)