Specifications

3-122
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.86 RTRV-ALM-RING: Retrieve Alarm Ring
This command instructs the NE to retrieve and send the current status of all active alarm conditions
against a ring object for BLSR. The alarm condition or severity to be retrieved can be specified by using
the input parameters as a filter.
Output Format SID DATE TIME
M CTAG COMPLD
“[<AID>],[<AIDTYPE>]:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,,,,:
[<DESC>]”
;
where:
• <AID> is the identifier that has an alarm condition and is from the “EQPT”
section on page 4-11; <AID> is optional
• valid values for <AIDTYPE> are shown in the “MOD2B” section on page 4-45;
<AIDTYPE> is optional
• <NTFCNCDE> is the 2-letter notification code; valid values for <NTFCNCDE>
are shown in the “NOTIF_CODE” section on page 4-49
• <CONDTYPE> is the alarm condition; valid values for <CONDTYPE> are
shown in the “CONDITION” section on page 4-24
• <SRVEFF> is the effect on service caused by the alarm condition; valid values
for <SRVEFF> are shown in the “SERV_EFF” section on page 4-56
• <DESC> is the condition description; <DESC> is a string and is optional
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“SLOT-7,EQPT:MJ,HITEMP,NSA,,,,:\“HI TEMPERATURE\”,”
;
Errors This message generates all the default errors
Section RTRV-ALM-EQPT Description (continued)
Section RTRV-ALM-RING Description
Category BLSR
Security Retrieve
Related
Messages
ED-BLSR RTRV-ALM-BITS
REPT ALM <MOD2ALM> RTRV-ALM-ENV
REPT ALM BITS RTRV-ALM-EQPT
REPT ALM COM RTRV-ALM-SYNCN
REPT ALM ENV RTRV-BLSR
REPT ALM EQPT RTRV-COND-<MOD2ALM>
REPT ALM RING RTRV-COND-ALL
REPT ALM SYNCN RTRV-COND-BITS
REPT EVT COM RTRV-COND-ENV
REPT EVT RING RTRV-COND-EQPT
RTRV-ALM-<MOD2ALM> RTRV-COND-RING
RTRV-ALM-ALL RTRV-COND-SYNCN