Specifications

3-118
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
Related
Messages
ED-BITS RTRV-ALM-ALL
ED-NE-SYNCN RTRV-ALM-ENV
ED-SYNCN RTRV-ALM-EQPT
OPR-SYNCNSW RTRV-ALM-RING
REPT ALM <MOD2ALM> RTRV-ALM-SYNCN
REPT ALM BITS RTRV-BITS
REPT ALM COM RTRV-COND-<MOD2ALM>
REPT ALM ENV RTRV-COND-ALL
REPT ALM EQPT RTRV-COND-BITS
REPT ALM RING RTRV-COND-ENV
REPT ALM SYNCN RTRV-COND-EQPT
REPT EVT BITS RTRV-COND-RING
REPT EVT COM RTRV-COND-SYNCN
REPT EVT SYNCN RTRV-NE-SYNCN
RLS-SYNCNSW RTRV-SYNCN
RTRV-ALM-<MOD2ALM>
Input Format RTRV-ALM-BITS:[<TID>]:<AID>:<CTAG>::[<NTFCNCDE>],
[<CONDTYPE>],[<SRVEFF>][,,,];
where:
• <AID> is an identifier that has an alarm condition and is from the AID “BITS”
section on page 4-9; <AID> must not be null
• <NTFCNCDE> is the 2-letter notification code; valid values for <NTFCNCDE>
are shown in the “NOTIF_CODE” section on page 4-49. A null value is
equivalent to ALL.
• <CONDTYPE> is the alarm condition; valid values for <CONDTYPE> are
shown in the “CONDITION” section on page 4-24
• <SRVEFF> is the effect on service caused by the alarm condition; valid values
for <SRVEFF> are shown in the “SERV_EFF” section on page 4-56. A null
value is equivalent to ALL.
Input Example RTRV-ALM-BITS:ELVERANO:BITS-1:228::CR,LOS,SA;
Section RTRV-ALM-BITS Description (continued)