Specifications

3-115
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
Input Format RTRV-ALM-<MOD2ALM>:[<TID>]:<AID>:<CTAG>::[<NTFCNCDE>],
[<CONDTYPE>],[<SRVEFF>][,,,];
where:
• <AID> is the access identifier from the “ALL” section on page 4-5 and must not
be null
• <NTFCNCDE> is the 2-letter notification code; valid values for <NTFCNCDE>
are shown in the “NOTIF_CODE” section on page 4-49. A null value is
equivalent to ALL.
• <CONDTYPE> is the alarm condition; valid values for <CONDTYPE> are
shown in the “CONDITION” section on page 4-24
• <SRVEFF> is the effect on service caused by the alarm condition; valid values
for <SRVEFF> are shown in the “SERV_EFF” section on page 4-56. A null
value is equivalent to ALL.
Input Example RTRV-ALM-OC12:ELDRIDGE:FAC-5-1:225::MN,SD,SA;
Output Format SID DATE TIME
M CTAG COMPLD
“<AID>,[<AIDTYPE>]:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,,,,:
[<DESC>]”
;
where:
• <AID> is the access identifier from the “ALL” section on page 4-5
• <AIDTYPE> is the type of access identifier; valid values for <AIDTYPE> are
shown in the “MOD2ALM” section on page 4-44, <AIDTYPE> is optional
• <NTFCNCDE> is the 2-letter notification code; valid values for <NTFCNCDE>
are shown in the “NOTIF_CODE” section on page 4-49
• <CONDTYPE> is the alarm condition; valid values for <CONDTYPE> are
shown in the “CONDITION” section on page 4-24
• <SRVEFF> is the effect on service caused by the alarm condition; valid values
for <SRVEFF> are shown in the “SERV_EFF” section on page 4-56
• <CONDDESR> is the condition description; <CONDDESCR> is a string and is
optional
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“FAC-5-1,OC12:MJ,SD,SA,,,,:\“BER AT SIGNAL DEGRADE LEVEL\”,”
;
Errors This message generates all the default errors
Section RTRV-ALM-<MOD2ALM> Description (continued)