Specifications

3-114
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.81 RTRV-ALM-<MOD2ALM>:Retrieve Alarm (DS1, E100, E1000, EC1, G1000,
OC3, OC12, OC48, OC192, STS1, STS3C, STS9C, STS12C, STS24C, STS48C,
STS192C, T1, T3, VT1)
(DS1, E1000, EC1, OC192, STS192C supported for ONS 15454 only.
Instructs the NE to retrieve and send the current status of its alarm conditions. The alarm condition or
severity to be retrieved can be specified by using the input parameters as a filter.
Notes:
1. VT1-n-n-n replaces PS_VT1-n-n-n for VT1 alarm AID.
2. The [<AIDTYPE>] shows STS1 for STS alarms.
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“STS-2-4::LEVEL=STS1,SFBER=1E-3,SDBER=1E-5,RVRTV=Y,RVTM=1.0,
EXPTRC=“EXPTRCSTRING”,TRC=“TRCSTRING”,
INCTRC=“INCTRCSTRING”,TRCMODE=AUTO,TACC=8”
;
Errors This message generates all the default errors
Section RTRV-<STS_PATH> Description (continued)
Section RTRV-ALM-<MOD2ALM> Description
Category Fault
Security Retrieve
Related
Messages
REPT ALM <MOD2ALM> RTRV-ALM-EQPT
REPT ALM BITS RTRV-ALM-RING
REPT ALM COM RTRV-ALM-SYNCN
REPT ALM ENV RTRV-COND-<MOD2ALM>
REPT ALM EQPT RTRV-COND-ALL
REPT ALM RING RTRV-COND-BITS
REPT ALM SYNCN RTRV-COND-ENV
REPT EVT COM RTRV-COND-EQPT
RTRV-ALM-ALL RTRV-COND-RING
RTRV-ALM-BITS RTRV-COND-SYNCN
RTRV-ALM-ENV