Specifications

3-111
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
Output Format
(continued)
• Valid values for <BLSRTYPE> are shown in the “BLSR_TYPE” section on
page 4-23 and <BLSRTYPE> is optional.
• <MUX> BLSR Extension Byte (supported only on OC48AS cards). Valid values
for <MUX> are shown in the “MUX_TYPE” section on page 4-49; <MUX> is
optional.
• <PST> identifies the OCN port state (e.g. IS or OOS); <PST> defaults to OOS
and valid values for <PST> are shown in the “PST” section on page 4-53, <PST>
is optional.
Output
Example
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“FAC-6-1:,,WORK,ACT:DCC=N,TMGREF=N,SYNCMSG=Y,SENDDUS=N,
PJMON=48,SFBER=1E-4,SDBER=1E-6,MODE=SONET,WVLEN=1310.00,
RINGID=43,BLSRTYPE=WESTWORK,MUX=E2:OOS”
;
Errors This message generates all the default errors
Section RTRV-<OCN_TYPE> Description (continued)