Specifications

3-109
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.79 RTRV-<OCN_TYPE>: Retrieve (OC3, OC12, OC48, OC192)
(OC192 supported for ONS 15454 only)
This command retrieves the attributes (i.e. service parameters) and the state of an OC-N facility.
Both RINGID and BLSRTYPE identify the OCN port connected with a BLSR. These attributes are only
presented for the OC12, OC48, OC192 ports within a BLSR connection. The RTRV-BLSR command
with the AID RINGID, can provide more information on this BLSR.
Note This command does not show the WVLEN attribute if the OCN port has zero value on WVLELN.
Section RTRV-<OCN_TYPE> Description
Category Ports
Security Retrieve
Related
Messages
ED-<OCN_TYPE> RST-<MOD_PORT>
ED-DS1 RTRV-DS1
ED-EC1 RTRV-EC1
ED-G1000 RTRV-G1000
ED-T1 RTRV-T1
ED-T3 RTRV-T3
RMV-<MOD_PORT>
Input Format RTRV-<OCN_TYPE>:[<TID>]:<AID>:<CTAG>[::::];
where:
• <AID> is the access identifier from the “FACILITY” section on page 4-11 and
must not be null.
Input Example RTRV-OC48:PENNGROVE:FAC-6-1:236;