Specifications

3-104
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.72 RLS-LPBK-<MOD2_IO>: Release Loopback (DS1, EC1, G1000, OC3, OC12,
OC48, OC192, T1, T3)
(DS1, EC1, and OC192 supported for ONS 15454 only)
This command releases a signal loopback on an I/O card.
Notes:
1. The optional [<LPBKTYPE>] field defaults to the current existing loopback type.
2. The TERMINAL loopback type is not supported for a DS3XM card.
Section RLS-EXT-CONT Description
Category Environmental Alarms and Controls
Security Maintenance
Related
Messages
OPR-EXT-CONT RTRV-ATTR-ENV
REPT ALM ENV RTRV-COND-ENV
REPT EVT ENV RTRV-EXT-CONT
RTRV-ALM-ENV SET-ATTR-CONT
RTRV-ATTR-CONT SET-ATTR-ENV
Input Format RLS-EXT-CONT:[<TID>]:<AID>:<CTAG>[::,];
where:
• <AID> identifies the external control being released and is from the “ENV”
section on page 4-10
Input Example RLS-EXT-CONT:CISCO:ENV-OUT-2:123;
Errors This message generates all the default errors
Section RLS-LPBK-<MOD2_IO> Description
Category Testing
Security Maintenance
Related
Messages
OPR-LPBK-<MOD2_IO>
Input Format RLS-LPBK-<MOD2_IO>:[<TID>]:<AID>:<CTAG>::,,,[<LPBKTYPE>];
where:
• <AID> is the access identifier. The <AID> is only supported for FACILITY and
DS1; <AID> is from the “ALL” section on page 4-5
• <LPBKTYPE> indicates the loopback type; valid values for <LPBKTYPE> are
shown in the “LPBK_TYPE” section on page 4-43
Input Example RLS-LPBK-DS1:PTREYES:DS1-4-2-13:203::,,,FACILITY;
Errors This message generates all the default errors