Specifications

FIGURES
xv
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Figure 1-1 Autonomous message format 1-5
Figure 1-2 Single node view (Node 1) 1-9
Figure 1-3 Circuit with no access 1-10
Figure 1-4 Monitor E (MONE) access 1-10
Figure 1-5 Monitor F (MONF) access 1-10
Figure 1-6 Monitor EF (MONEF) access 1-11
Figure 1-7 Split E (SPLTE) access 1-11
Figure 1-8 Split F (SPLTF) access 1-11
Figure 1-9 Split EF (SPLTEF) access 1-12
Figure 1-10 LOOPE access 1-12
Figure 1-11 LOOPF access 1-12
Figure 1-12 SPLTA access 1-13
Figure 1-13 SPLTB access 1-13
Figure 1-14 Multi-node view (MONE example) 1-14
Figure 2-1 Example of a GNE topology 2-2
Figure 2-2 Four-node ring without TL1 Gateway 2-4
Figure 2-3 Four-node ring with TL1 Gateway 2-4
Figure 5-1 Network configured with a 1WAY UPSR circuit 5-2
Figure 5-2 Network map with Cisco node showing ring-to-ring interconnection 5-3
Figure 5-3 UPSR to UPSR connection specifications through the Cisco node 5-3
Figure 5-4 Selector between 5/1/1 and 6/1/1 5-4
Figure 5-5 Selector between 12/3/2 and 13/3/2 5-4
Figure 5-6 UPSR to two-fiber BLSR 5-4
Figure 5-7 Selector between 5/1/1 and 6/1/1 5-5
Figure 5-8 Bridge from 12/3/2 to Ring 1 5-5
Figure 5-9 Two-fiber BLSR to UPSR 5-5
Figure 5-10 Bridge from 6/1/1 to Ring 2 5-6
Figure 5-11 Selector between 12/3/2 and 13/3/2 to Ring 1 5-6
Figure 5-12 Two-fiber BLSR to two-fiber BLSR 5-6
Figure 5-13 2WAY connection from 5/1/1 to 13/3/2 5-7
Figure 5-14 Two-fiber BLSR to four-fiber BLSR 5-7