Specifications

3-99
Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, R3.3
May 2002
Chapter 3 TL1 Command Descriptions
TL1 Commands
3.5.66 REPT EVT EQPT: Report Event Equipment
Reports the occurrence of a non-alarmed event against an equipment unit or slot.
Section REPT EVT EQPT Description
Category Equipment
Security Retrieve
Related
Messages
ALW-SWDX-EQPT INH-SWTOWKG-EQPT
ALW-SWTOPROTN-EQPT REPT ALM EQPT
ALW-SWTOWKG-EQPT RTRV-ALM-EQPT
DLT-EQPT RTRV-COND-EQPT
ED-EQPT RTRV-EQPT
ENT-EQPT SW-DX-EQPT
INH-SWDX-EQPT SW-TOPROTN-EQPT
INH-SWTOPROTN-EQPT SW-TOWKG-EQPT
Output Format SID DATE TIME
A ATAG REPT EVT EQPT
“<AID>:<CONDTYPE>,[<CONDEFF>],,,,,,,:[<DESC>],[<AIDDET>]”
;
where:
• <AID> indicates an equipment AID SLOT-{1-17} and is from the “EQPT”
section on page 4-11
• <CONDTYPE> indicates an event condition type; <CONDTYPE> defaults to
EQPT and the valid values are shown in the “CONDITION” section on
page 4-24
• <CONDEFF> indicates an effect of the condition on the NE; valid values for
<CONDEFF> are shown in the “COND_EFF” section on page 4-24,
<CONDEFF> is optional
• <DESC> is the condition description; <DESC> is a string and is optional
• <AIDDET> specifies the type of AID; valid values for <AIDDET> are shown
in the “EQPT_TYPE” section on page 4-38, <AIDDET> is optional
Output
Example
TID-000 1998-06-20 14:30:00
A 001 REPT EVT EQPT
“SLOT-7:PLUGIN,TC,,,,,,,:\“EQUIPMENT PLUG-IN\”,TCC”
;